FDA-cleared biocompatible resins
Rapidly Growing Dental Resin Library
Now offering open certified materials.
Desktop Health's large library of FDA-cleared biocompatible resins and precise model materials represent outstanding value and quality for every clinical application.
Explore Dental Resins
Flexcera™ Base
FDA-cleared premium denture bases
Light-curable resin for the fabrication of high-impact and removable denture bases. Compatible and validated for use with EnvisionTEC™ systems.
- Digital Denture Base
Learn More
Flexcera™ Smile
Premium denture teeth
Light-curable resin for the fabrication of high-impact artificial teeth with variable translucency for dentures. Compatible and validated for use with EnvisionTEC™ systems.
- Digital Denture Teeth
Learn More
Flexcera™ Smile Ultra+
For permanent, printable smiles
A next-generation hybrid nanoceramic resin FDA 510(k) Class 2 cleared for a wide range of permanent and temporary dental restorations.
- Teeth for dentures
- Crowns
- Inlays
- Onlays
- Bridges
- Veneers
- Monolithic full and partial dentures
Learn More
Model X
Premium meets precision
Model X with its 50-micron build layer allows for exceptionally detailed crowns, bridges with removable dies, implant cases and diagnostic and orthodontic models.
- Crown and bridge with removable dies
- Orthodontic models
- Implant models
- Clear aligner models
- Diagnostic models
Model Z
For high speed when you need it most
Model Z is as effective as it is fast. This low-viscosity model material is ideal for thermoforming models, diagnostic models and orthodontic appliance models requiring a smooth surface resolution, easy clean up, and a superior fit and finish.
- Thermoforming models
- Crown and bridge models
- Orthodontic models
- Implant models
- Clear aligner models
- Diagnostic models
E-Guide
For the production of surgical drill guides
The E-Guide is a biocompatible certified Class I material, developed for the production of high-precision surgical drill guides for use in implant surgery. The results produced by combining E-Guide with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides.
- Surgical guides
- Pilot drill guides
- Drilling templates
- Device sizing templates
E-Guard
A biocompatible transparent material for the production of accurate orthodontic bite splints and night guards
The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility.
- Night guards
- Occlusal guards
- Snoring appliances
- Bite splints
- Bite planes
E-Tray
For the production of custom dental trays to obtain dental impressions
E-Tray is a 3D printing material for use in producing individual customized impression trays. Dental impressions can be used for preliminary impressions, final impressions, and bite registrations, and are used for prosthodontics, orthodontics, dental crown and bridges, maxillofacial prosthetics, oral and maxillofacial surgery, in diagnosis, mouth guards, whitening trays, and for the permanent dental record to document before and after phases.
- Custom impression trays
E-Model HS
For use in producing orthodontic arch models extremely quickly
E-Model HS is ideal for orthodontic applications when using a thermoforming technique to produce clear aligners. With the ability to print up to 120 mm/hour, this material is the fastest-printing resin on the market today. This material produces models with high accuracy and an exceptional surface finish for a perfect fit.
- Thermoforming models
- Clear aligner models
- Orthodontic appliance models
- Diagnostic models
E-Model Light DLP
For high accuracy dental model needs
E-Model Light DLP 3D printing material is the perfect choice for a wide variety of high-accuracy dental modeling needs. This material is ideal for crown and bridge models, especially those with removable dies. E-Model Light DLP produces extremely detailed models, with exceptional surface finish.
- Crown and bridge with removable dies
- Orthodontic models
- Implant models
- Clear aligner models
- Diagnostic models
Press-E-Cast
Can be pressed into full contour ceramics
A wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish. The burnout for parts 3D-printed in Press-E-Cast is rapid, clean and ash-free, resulting in accurate, quality castings. With a moderate wax content, Press-E-Cast also delivers low thermal expansion during burnout. Details on casting Press-E-Cast can be found in this Best Practices document.
- Crown and bridge wax ups
- Pressing and casting full contour crowns
- Casting copings and subtractures
- Casting removable partial denture frameworks
E-Denstone
For the rapid production of highly accurate, scannable dental models
With a look and feel similar to traditional gypsum models, E-Denstone delivers a matte finish, which assists in accurate scanning for verification purposes. This material allows the user to die trim, margin mark with a red pencil and hand wax to the die without concern over layer lines. Die paint sticks to the dies just like plaster and won’t peel off.
- Crown and bridges models
- Mounting casts
- Counter models
- Casting partials
- Denture repairs
E-Aqua Model
Low viscosity of the liquid material allows for quick and easy cleanup of the models
E-Aqua Model printing material for DLP and cDLM 3D printers is the perfect choice high-accuracy orthodontic models AND allows for the first environmentally friendly cleaning process using only water. A high grade strength gives E-Aqua Model added stability during the build, resulting in lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models without the need to use alcohol.
- Crown and bridge models
- Orthodontic models
- Implant models
- Clear aligner models
- Diagnostic models
E-Partial
An accurate material for dental modelmaking and clear aligner production
A castable material developed for a specific need in the dental industry: delivering delicate partial frameworks with thin features and some flexibility. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time.
- Crown and bridge models
- Orthodontic models
- Implant models
- Clear aligner models
- Diagnostic models
E-OrthoShape
Produces extremely detailed models, with exceptional surface finish
E-OrthoShape is a grey ABS-like material that prints in 100 micron layers. It is recommended for the affordable volume production of models on which to produce clear thermoformed aligners by orthodontic professionals.
- Crown and bridge models
- Orthodontic models
- Implant models
- Clear aligner models
- Diagnostic models
SmileGuard™
Protect Your Patients with SmileGuard™ Resin
For 3D Printed Dental Bites, Splints, Night Guards, and Mouth Guards. Increase throughput, print multiple guards at once, low cost unit per print for high ROI, and patient preferred with a more comfortable, customized fir than conventional methods.
- Biocompatible
- Comfortable
- Durable
- Tasteless
- Odorless
- Easily cleaned
Spend Less.
Smile More.
We are your guaranteed low price high-tech connection. We pride ourselves on bringing you the highest quality technology products to increase productivity and efficiency while providing patients with an unparalleled experience.
The absolute lowest prices on premium dental technology worldwide.
Fast delivery from our warehouse in the USA.
Get your full suite of dental technology all in one place.
Accepting national and international payment options.
Accepted Payments
Navigation
Sign Up For Discounts & Updates
Contact Us
By signing up for text, you agree to Dental Technologies Terms of Service and Privacy Policy. By signing up via text, you agree to receive recurring automated promotional and personalized marketing text messages (e.g. cart reminders) from Dental Technologyat the cell number used when signing up. Consent is not a condition of any purchase. Reply STOP to cancel. Msg frequency varies. Msg and data rates may apply.